3-Pole Soft Wiring

Subcategories

• Softwire Starters

  Starters are where a 3-pole soft wiring run begins. A starter plate, starter lead or installation coupler takes power from the building supply and feeds it into the plug-together soft wiring system, ready for interconnect leads, distribution blocks and power outlets.

  Cableduct supplies starters to suit hard-wired, plug-in and cabinet installations. Starters must be installed by a licensed electrician.

• In-Desk Power

  In-desk power units set GPO power, USB charging and wireless charging into the desk, table or screen for a clean, flush finish. Choose from grommet outlets, in-desk boxes and modules, panel-mount units and wireless chargers.

  Each unit connects with an AU plug or a 3-pole inline splitter lead to run on a soft wiring system. Every available part number is listed on each product page.

• Desk Top Power

  Desktop power rails and units bring GPO power, USB charging, data and AV up onto the desk surface. Clamp-on rails, rear-entry units and bench-mounted table boxes suit workstations, meeting rooms, hot desks and benches.

  Units connect with an AU plug or a 3-pole inline splitter lead to run on a soft wiring system. Every available part number is listed on each product page.

• Snap-In Connectors

  Snap-in connectors create 3-pole soft wiring sockets and plugs in desks, joinery, panels and power modules. They snap into a panel cut-out and use push-in terminals, so stripped conductors connect without crimping or screws.

  Colour-coded black, white and red bodies make circuits easy to identify. Every available part number is listed on each product page.

• Installation Couplers

  Installation couplers make permanent or semi-permanent 3-pole soft wiring connections with screwed terminals. Male and female halves join and extend soft wiring runs behind desks, partitions and joinery.

  Colour-coded black, white and red bodies help identify circuits. Every available part number is listed on each product page.

• Interconnect Leads

  Interconnect leads link soft wiring components together. Pre-made 3-pole leads with positive-locking connectors click between starters, distribution blocks, power units and outlets, so runs can be extended and changed quickly.

  Leads are available in a wide range of lengths in black and white. Every available part number is listed on each product page.

• Distribution Blocks

  Distribution blocks split one soft wiring feed into several outputs, so power can branch out to multiple desks, outlets or power units from a single run. They plug together with 3-pole snap connectors for fast, tool-free layouts.

  Every available part number is listed on each product page.

• Rewireable Connectors

  Rewireable connectors let an electrician make up custom 3-pole soft wiring leads on site. Screw-in terminals take the cable directly, so leads can be cut to exact length and connectors replaced or re-terminated when layouts change.

  Every available part number is listed on each product page.

• Power Outlets

  Soft wiring power outlets provide GPO sockets that plug straight into a 3-pole soft wiring system. Mount them in desks, partitions, joinery and service columns wherever power is needed.

  Every available part number is listed on each product page.